Hot chamber die casting machine

1.Top brand of China in die casting machine line 2.Over ten years experience 3.Can fully automatic 4.2000T export to Germany

JSR38Ton hot chamber die casting machine

Hydraulic system,and control system

1.All electric elements, valves, pumps and seal parts are made in Germany or Japan.

2.Imported proportional pressure valve and proportional flow valve for controlling the pressure and flow so that the mechanism can run quickly,stably,safely,reliably and energy-savingly.

Clamping system,and lubrication system

1.Advanced manufacturing technology: Die plates and crank are made from high-strength quality nodular cast iron.

2.Adopt self-lubricating bushes and sliding blocks: Decease the clampling time,improve the lifetime of die casting machine.

3.Electric centralized lubrication device: Auto lubrication by PLC controller,can incease the lifetime of machine and reduce maintenance.

Injection system,pressure-increase system,and mould adjustment system

1.Can set on human-machine interface,in this way,the pressure,speed and starting speed can adjust accurately,to guarantee the quality of the die casting products 

2.Independent setting injection & intensification accumulator: Noninterference between fast-speed injection & intensification, independent regulator. 

Main specifications and parameters

Model	Unit	JSR88
Clamping force	KN	880
Platen size(HxV)	mm	535×540
Space between tie bars(HxV)	mm	357×357
Tie bar diameter	mm	63
Die thickness(Min-Max)	mm	150~350
Die stroke	mm	245
Ejection stroke	mm	60
Ejection force	KN	52
Injection force	KN	65
Injection position	mm	0,-60
Plunger-tip Diameter	mm	50,55
Shot weight(Zn)	Kg	1.53
Casting Area	Cm2	320
Ejection Force	KN	52
Ejection Stroke	mm	60
Traverse Stroke	mm	190
Working pressure	MPa	10.5
Motor Power	KW	11
Melting Pot Capacity	Kg	360
Electric Consumption for Furnace	KW	30
Nozzle Heater Power	KW	2
Oil Store capacity	L	250
Weight of machine	KG	4000
Machine overall size	m	4.3×1.4×2.1

Hot chamber die casting machine